When a helmet costs $6 and another costs $26, the difference is usually not the logo. It is how the shell and the energy-absorbing liner are joined.
Molded separately, then glued. Cheap tooling, easy graphics, heavier, bonded line is a variable.
One structure, no adhesive. Lighter and stronger, but every shape needs its own expensive mold.
Sits between the two on cost and performance — the usual choice when tooling budget is fixed.
Hardshell (also called "glued" or "tape-on")
A thin PC or ABS shell is molded separately, then bonded to a pre-formed EPS liner with adhesive. This is the oldest and most flexible method.
- Advantages - low tooling cost, easy to change graphics and colors, works for complex shapes, easy to add vents and accessory points.
- Trade-offs - heavier, and the bond line is a potential weak point if adhesive quality is inconsistent.
- Typical use - industrial safety helmets, budget cycling helmets, rescue and climbing helmets where accessory mounting matters more than weight.
In-mold
The EPS liner is foamed directly inside the shell, so the two fuse into a single structure with no adhesive layer.
- Advantages - lighter, stronger as a unit, allows larger and better-shaped vents without losing structural integrity.
- Trade-offs - expensive tooling, and every shell shape needs its own mold. Graphics are typically applied after molding, so color changes are more involved.
- Typical use - mid and high-end cycling and ski helmets.
Hybrid
A hardshell with an in-mold lower section, or a PC shell over a molded EPS body with partial fusion. It sits between the two on both cost and performance, and is common where a buyer wants in-mold feel at hardshell tooling economics.
What actually drives your unit price
- Tooling amortisation - a new mold is a one-time cost spread across your order. At 500 units it dominates the price. At 20,000 units it nearly disappears.
- EPS density and liner complexity - multi-density liners cost more and absorb better.
- Retention system - a basic strap-and-buckle versus a dial-fit cradle is a real cost step.
- Finishing - water-transfer printing, soft-touch coating and multi-color graphics each add a pass through the line.
Two quotes for "a cycling helmet" are not comparable until you fix: shell construction, EPS density, retention type, strap and buckle supplier, finish, packaging, and the certification standard. Most quotes that look 40% cheaper are simply a different product.
We mold both hardshell and hybrid constructions in-house, which is why we can quote a custom shape without subcontracting the tooling. Browse the ranges, or send us a spec and we will tell you which construction fits it.